HW-10 · Narrow fill, single door
Single-door storage cabinet
Every run ends in a leftover measurement. HW-10 is what takes it: 400, 450 or 500 mm wide on the same 656 mm depth and 900 mm height as everything else, so the run arrives at the wall on a whole number instead of a packing piece.
- Width
- 400 / 450 / 500
- Depth
- 656
- Height
- 900
Prices are quoted per order — module mix, finish, counter and freight all move. A quote is valid 15 days.
Catalogue & dimensions
PDF with the full module range and the appliance cut-out library.
Specification
HW-10 in numbers
Millimetres, as supplied. Three widths, one depth, one height — the narrow module is not a cut-down version of anything.
| Body width | 400, 450 or 500 mm |
|---|---|
| Body depth | 656 mm |
| Body height | 900 mm |
| Fits | One door, one stainless shelf — jars, bottles, trays, cleaning kit |
| Handing | Left or right, named on the order |
| Castors | 2.5 inch, standard |
| Panel build | 0.45 mm 304 stainless both faces over aluminium honeycomb core |
| Panel thickness | 18 mm cabinet body, 20 mm door and end panel |
| Colour range | Standard colour card, or matched to sample at an extra charge |
Figures are the finished dimensions from the standard range. Where a module departs from the common 656 mm depth it is stated on the module page, not averaged.
What it does
The last 500 mm is the hard part
A run is arithmetic. You have a wall of a certain length, an appliance bay that cannot be narrower than the grill, and whatever is left at the end. Most of that leftover is too small for an 800 mm module and too large to leave as a gap — which is exactly the range HW-10 covers.
Because it shares the 656 mm depth and the 900 mm height, it closes a run without a step, a filler strip or a scribe. In widths of 400, 450 and 500 mm, the three together can absorb almost any remainder you are likely to meet.
In the standard configuration
- Door panel and a false door
- Left and right side panels, base panel, top panel, back panel
- One stainless steel shelf
- L-shaped handle-free profile
- 304 stainless worktop
- Skirting board and 2.5 inch castors
Against a wall
The narrow module is usually the one that meets the wall, so the door swing has to work in the corner.
Next to a corner
Pair it with HW-08 or HW-09 rather than paying for a filler panel.
The small door
Jars, bottles and cleaning kit — the things you want without opening an 800 mm door.
Straight answers
Questions about this module
Why three widths instead of one?
Because a leftover is not a fixed size. 400, 450 and 500 mm let you land on a whole number rather than leaving a gap or ordering a filler. Pick the width that closes the run — not the one that looks best on its own.
Left or right hinged?
Named on the order, and set at the factory. Handing is not something that can be changed on site, so it is fixed before production starts.
Do I need a sight panel at the end of the run?
If the side of this module is visible, yes — otherwise what shows is the cabinet side rather than a finished panel face. HW-11 closes a left-hand end, HW-12 a right-hand end, both 18 mm and finished in the same face as the door.
Adjacent modules
What usually sits next to it
Because every module shares the same height and depth, any of these lines up without adjustment.
Page last updated · Reviewed by the BOGEQI technical team, Foshan Bogeqi Cabinetry Co., Ltd.