HW-08 · Corner, left handing
Left-deep corner cabinet
1,075 mm deep corner cabinet with a false door on the left side panel. It is the module that lets a run turn without a right-angle dead spot, and it is handed — HW-08 is left, HW-09 is right.
- Width
- 1075
- Depth
- 656
- Height
- 900
Prices are quoted per order — module mix, finish, counter and freight all move. A quote is valid 15 days.
Catalogue & dimensions
PDF with the full module range and the appliance cut-out library.
Specification
HW-08 in numbers
Millimetres, as supplied. Every module shares 900 mm height and the 2.5 inch castor line, so any two line up without packing.
| Body width | 1075 mm |
|---|---|
| Body depth | 656 mm |
| Body height | 900 mm |
| Fits | The turn in an L or a U shaped run |
| Castors | 2.5 inch, standard |
| Panel build | 0.45 mm 304 stainless both faces over aluminium honeycomb core |
| Panel thickness | 18 mm cabinet body, 20 mm door and end panel |
| Colour range | Standard colour card, or matched to sample at an extra charge |
Figures are the finished cabinet dimensions from the standard range. Where a module departs from the common 656 mm depth it is stated on the module page, not averaged.
Deciding
The corner that turns a run to the left
Nothing below is a sales argument. Two of the four points are reasons not to order this module.
What left-hand actually means
Stand facing the front of the run. The corner cabinet whose closed face is on your left is HW-08. The counter arrives from the right, turns, and leaves along the left-hand leg. The false door sits on the left side panel because that is the face that ends up in view.
Both legs are 1,075 mm
Each leg of the L is 1,075 mm measured along the wall. Plan with that figure: a 1,075 mm corner, an 800 mm sink and a 1,182 mm grill cabinet already use 3,057 mm of one wall before anything else is added.
It replaces two cabinets, not one
A right-angle corner without a corner cabinet leaves a dead square behind the doors that nobody can reach. HW-08 occupies that square with a shelf reachable from the open leg, which is why it costs more than a straight unit of the same width.
Where the left leg usually lands
On a wall running back towards the house, or on a return that holds the sink. If the left leg is short, check whether the corner plus one 400 mm door is enough before ordering anything wider.
Straight answers
Questions about this module
Left or right — how do I know which one?
Stand facing the front of the run. The corner cabinet whose false door is on your left is HW-08. Get it wrong and the panel faces into the cabinet instead of closing the corner.
What is the difference between HW-08 and HW-09?
Handing. They are mirror images: HW-08 is left-deep, HW-09 is right-deep. Same 1,075 × 656 × 900 dimensions.
Can the corner be shortened?
No. The 1,075 dimension is set by the geometry of the corner, not by preference.
Adjacent modules
What usually sits next to it
Because every module shares the same height and depth, any of these lines up without adjustment.
Page last updated · Reviewed by the BOGEQI technical team, Foshan Bogeqi Cabinetry Co., Ltd.