Modular & unit cabinets
The ten cabinets, how they combine, and how the grid lets you change the face without changing the footprint.
The short answer
Ten cabinets, one height, one depth. Fixed widths combine into any run, and the face can change without a new carcass.
Read in this order
Start here
The rest of the category is variations on these. Each answers one question rather than listing trends.
Guides in this section
The full list
Newest first. Each guide answers one question and links to the cabinet, drawing or report that settles it.
Before you read the guides
How the ten modules combine
These are the decisions the guides below keep returning to. Settle them roughly first; the articles then fill in the detail.
One height, one depth
Every module shares the 900 mm height and the 656 mm depth line, so any two of them sit together without a step.
Widths are fixed
400, 450, 500, 600, 800, 900, 1,075 and 1,182 mm. A run length is a sum of those numbers, which is why the layout comes before the price.
A run is a sequence
Modules bolt to each other through the frame. That is what makes a two-module balcony run and a six-module terrace the same product.
Corners are modules
HW-08 turns a run left and HW-09 turns it right. Neither is a cut-down cabinet, which is why the plan dimension is 1,075 mm on both legs.
Open ends need a panel
HW-11 and HW-12 close a visible end. Without one, the honeycomb core edge is what a visitor sees from the side.
Straight answers
Questions this section gets most
If the answer you need is not here, the enquiry form asks for the grill model and the run length and nothing else.
Can I add a module later?
Yes, if the run still has an open end and the finish is still on the card. Additions after the run is against two walls usually mean rebuilding it.
Is the run made to measure?
The run length is. The modules are not — they are fixed-width units assembled to reach that length.
How is a gap to the wall closed?
With a 400 mm single-door module if the gap is usable, or with a sight panel if it is only a few centimetres. The difference is decided at drawing stage.
Save the reading
Send us the grill and the length
One field, then a configuration and a price. If your grill is one we have not cut for, we will ask for the manufacturer's drawing rather than guess at it.
Page last updated · Reviewed by the BOGEQI technical team, Foshan Bogeqi Cabinetry Co., Ltd.