Dimensions
Standard outdoor kitchen cabinet sizes — the fixed height and depth, the fixed widths from 400 to 1,182 mm, and what a non-standard depth costs later.
The short answer
Every cabinet is 900 mm high. Only the width changes — 800, 900, 1,075 or 1,182 mm, fixed, not a range. That single grid is what lets you combine modules into a continuous run.
Read in this order
Start here
The rest of the category is variations on these. Each answers one question rather than listing trends.
Guides in this section
The full list
Newest first. Each guide answers one question and links to the cabinet, drawing or report that settles it.
Before you read the guides
The numbers that decide the run
These are the decisions the guides below keep returning to. Settle them roughly first; the articles then fill in the detail.
Height, 900 mm including the castors
The counter lands at 900 mm because the castors are already in that figure. Take the castors off and everything downstream is wrong.
Depth, 656 mm
Every module is 656 mm deep except the grill cabinet, which is 643 mm so the front line stays at 900 with a deeper carcass behind it.
Width is fixed per module
400, 450, 500, 600, 800, 900, 1,075 and 1,182 mm. A run length is assembled from those, never cut from a longer cabinet.
The corner
HW-08 and HW-09 measure 1,075 mm on both legs. That is the plan dimension of the L, not the width of a flat cabinet.
The sight panel
656 × 18 × 890 mm, one per open end, fitted after the run is bolted so the finished face is flush with the doors.
Straight answers
Questions this section gets most
If the answer you need is not here, the enquiry form asks for the grill model and the run length and nothing else.
Can a module be cut down to fit?
No. Widths are fixed and the carcass is a welded frame with a honeycomb core. A run reaches an exact length through the module mix, not through cutting.
Can the height be changed?
Not on the standard range. The 900 mm figure includes the 2.5 inch castors and the 90 mm plinth and wheel zone.
Why is the grill cabinet shallower than the rest?
It is 643 mm against 656 mm so that a deeper appliance bay and a vented fascia still keep the doors on the same 900 mm front line.
Save the reading
Send us the grill and the length
One field, then a configuration and a price. If your grill is one we have not cut for, we will ask for the manufacturer's drawing rather than guess at it.
Page last updated · Reviewed by the BOGEQI technical team, Foshan Bogeqi Cabinetry Co., Ltd.